Prothane 191830 Ball Joint Dust Boots

  • 191830 360image 1
  • 191830 Ball Joint Dust Boots
  • 191830 Ball Joint Dust Boots
  • 191830 Ball Joint Dust Boots
  • 191830 Ball Joint Dust Boots
  • 191830 Ball Joint Dust Boots
  • 191830 360image large 1

Ball Joint Dust Boots

Manufacturer: Prothane
Part Number: 191830

:(?)
Black
Red
Price: $2.22

check_box In Stock check_box Ships Immediately


  • Qty 2 of 60520 - 0.500 Top I.D. X 1.420 Bottom I.D. X 0.720 Height
  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."

question_answer Ask us a Question

FitmentBall Joint Dust Boots 191830 fits these vehicles:

Prothane Polyurethane Universal Dust Boots

Prothane Dust Boots

Many of you are finding out that the rubber boot on your ball joint or tie rod has rotted away or has split. These boots are extremely important for the suspension of your vehicle. Fortunately, Prothane makes Universal Dust boots that will fit most vehicles. These dust boots are made of polyurethane and are far more durable than rubber. This will seal your boot to retain the grease in the joint, as well as protecting the joint from dirt, sand, water, and snow.

How-to obtain measurements

In order to select the proper boot, you will first need to grab a few measurements. The best way to do this is with a set of digital calipers. You will need to measure the diameter of the base where the boot will sit, the diameter of the shaft (also called the Pin Opening Diameter) and the height of the boot. Once you have gotten to your tie rod end measure these three spots. Be sure to be as exact as possible and to write down your measurements. If you have any trouble getting these measurements, give our customer service team at DST a call. It is important to note that you do not want to choose a boot that is bigger than your measurements. You want to choose a boot that is just slightly smaller than the measurements you obtained. The elasticity of the polyurethane will allow the hole to stretch and grip the joint tightly. If you choose a boot that is too large there will be a gap which lets in debris.

Prothane Dust Boots
Prothane Dust Boots

After Measureing Your Dust Boots

Now that you have these measurements, you can verify that this is the boot that you need. If you find that your measurements do not match this boot, go to our Universal Dust Boot page to match a part to your measurements.

Prothane 191830

Product Reviews for

5 Star (1)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Prothane 191830

5 out of 5 based on 1 user reviews. Write a Review

J
verified_user

starstarstarstarstar" Nice quality. "

I used these as grease seals on my 1963 Ford Falcon V8 tie rods. They work fine.

verified_user Verified Buyer - - . Prothane 191830 - 5 out of 5
Fitment for 191830

question_answer Customer Questions and Answers


Question:
What are the dimensions of part number 191830?
Answer:
On part number 191830, the pin opening is 13mm, the base opening is 36mm, and the height is 18mm.